Description
Description: Input voltage 0.8 ~ 3.3V,output 3.3V
Maximum output current: 500 MA,
Start Voltage 0.8V, Output Current 10MA
INPUT 1-1.5V, OUTPUT 3.3V 50-110MA;
INPUT 1.5-2V, OUTPUT 3.3V 110-160MA;
INPUT 2-3V, OUTPUT 3.3V 160-400MA;
INPUT above 3V, OUTPUT 3.3V 400-500MA;
DC-DC Boost module working frequency 150KHZ. efficiency is normal 85% .
2.54mm pin pitch, Arduiuo Breadboard friendly.
Excluding Pin Size 11mm x 10.5mm x 7.5mm(Very small)
Weight : about 1.2g( Very light)
Applications:
Battery powered equipment
Wireless Module,NRF24L01 CC1101 CC2500 etc.
Development Board,FPGA/CPLD STM32
Arduino_uno mega2560 Breadboard Raspberry Pi
LED Lighting
Wireless communication equipment
MP3/MP4 player
Audio equipment
Attention: This is a DC-DC voltage converter module,Must be noted when using:
1 Input voltage can not be greater than the maximum input range
2 Output power can not be greater than the maximum load for a long time
3 Input power must be greater than the output power, because the power consumption of the module itself